Top Wanddrucker Geheimnisse
Auf dem Markt gibt es viele Einige Marken ansonsten Modelle. Es zwang sehr umsichtig darauf geachtet werden, den besten unter ihnen zu auftreiben ebenso nach besorgen. Besonders nach beachten sind am werk folgende Punkte;
This makes the wand printer machine looks like a disposable consumable. With good luck, it can Beryllium used for a longer time. But if you got bad luck, you can’t continue working if it breaks once hinein a short time.
There is another very important thing: if you use the machine outdoors, the outdoor temperature is 30 degrees, when your machine starts to work for a while After a time, the temperature of the water rein the UV lamp water tank will be higher than 30 degrees. Do you think water higher than 30 degrees can play a cooling role? This is simply impossible.
While the wall printer is completely different. When the mauer printer is working, the main body of the machine is moving. Because the mauer does not move, and the carriage speed of the mauer printer (that is, the speed of the upper and lower rails) cannot Beryllium adjusted.
This has made our machine a big step forward and finally can print large-scale images for a long time. The appearance and structure of the machine have also been improved.
The wand printer machine is equipped with an ultrasonic Fühler that automatically senses the smoothness of the mauer and can draw any picture you design, including pictures of 3D effects.
There are two main types of mauer printers nowadays. One is the wall printer uses water-based pigment ink, and the other is the UV wand printers.
Der Druckkopf read more kann noch eine Zeit weit schaffen, obwohl er so recht ist, dass er bei Verwendung an einem Wanddrucker sehr zerbrechlich ist. Manchmal haben Sie Dasjenige Bild sogar nicht verfügbar gestellt, einer der Druckköpfe könnte nicht funktionierend umziehen ebenso es ist schwierig für Sie, mit einer solchen Aeroplan ein komplettes großformatiges Bild zu drucken.
Our R & 2r Mannschaft has a bachelor’s degree, and 50% of the R & 2r team has a master’s degree. The highly educated R & D Mannschaft provides us with continuous innovation ability and stable products.
I have been developing and producing wand printers since 2011. I have witnessed the scale of this industry growing from small to large, and the mauer printer Organisation from unstable to stable.
VSDT parameter ink drop technology, high fault tolerance feathering technology, automatic recovery printing technology
But, the working environment of the mauer printer is very complicated. Both indoor and outdoor, different temperatures, different levels of winds, and dust will all have a great impact on the wall printer.
The printhead is a printer component that helps transfer ink onto the page. It does this by firing tiny droplets of ink via numerous printer nozzles to create the desired print. When one of these nozzles gets clogged your prints appear faded or streaky.
Compared with the artist’s Anleitung painting, the automatic 3D wall printer surprisingly efficient. Give me three minutes to let you know more.
To help support the investigation, you can pull the corresponding error log from your Www server and submit it our support Mannschaft. Please include the Ray ID (which is at the bottom of this error page). Additional troubleshooting resources.